Portable MIG/MAG welding unit with built-in wire feeder for Ø200 mm spools.
For tradesmen – repair, maintenance and assembly welding of mild steels, aluminium and stainless steels as well as brazing. This easy to use, intelligent and powerful unit, offers excellent welding properties and is easy to take along to the job at hand.
Great if you are welding in the workshop or on the move.
Equipped with QSet™ - intelligent setting of welding parameters giving a perfect arc for all material and gas combinations. Single-knob control for consistent and optimal weld quality for all plate thicknesses.
3 m torch, 3 m mains cable with plug, 4.5 m gas hose with hose clamp and quick connector, return cable with clamp, simple shoulder strap, fitted wear parts in torch/feeder (for Ø0.8 mm wire). 1 kg OK Autrod 12.51, Ø0.8 mm welding wire is also included.
|External dimensions, LxWxH, mm||449x198x347|
|Enclosure class, protection||IP23C|
|Mains supply, V/Hz||230 +/- 15% / 1ph 50/60|
|Fuse, slow, A||16|
|Mains cable, Ø mm2||3x1.5|
|Max output at 25% duty cycle, A||180/23|
|Max output at 60% duty cycle, A||-|
|Max output at 100% duty cycle, A||100/19|
|Open circuit voltage, V||60|
|Power factor at max current||0.99|
|Efficiency at max current||82%|
|Setting range, A||30-200|
|Wire feed, m/min||2-12|
Note: HTML is not translated!
Rating: Bad Good