ESAB REBEL EMP 235ic Portable Welder 110V / 230V

ESAB REBEL EMP 235ic Portable Welder 110V / 230V

ESAB REBEL EMP 235ic Portable Welder 110V / 230V
Ex Tax: £1,650.00
Brand: ESAB
Product Code: 0700300989
Availability: Pre-Order



Rebel EMP 235ic

The bigger, badder Rebel EMP 235ic is the only true multi-process welder in its category, and it's ideal for applications that require MIG, gasless, and gas-shielded Flux-Cored wire, Stick, and TIG. And weighing in at only 53 pounds with an output rating of 235 A, it has a power-to-weight ratio that crushes the competition. With capability to weld the full range of .035 solid wire, you'll be blown away by its increased productivity and deposition rates.

This multi-process machine is packed with Rebel DNA, which is found in every Rebel machine. Features like sMIG technology (now extended to .045 solid wires), an industrial package that fits 12-inch spools, dual voltage capability, and a four-handle roll cage design all make Rebel 235 and its fellow Rebels rise above the rest. Details





Rebel EMP 235ic goes where you go. And that's priceless in today's demanding industries. With four perfectly placed handles and the ability to detach the power source from its cart, you can tackle any job, anywhere, with dual voltage capability from 110V to 230 V. From shop to field, the rugged unibody steel industrial housing gives you the confidence that Rebel 235 can handle even the most demanding environments.



When it comes to portable welders, small means weak, right? Dead wrong. Single-phase Rebel EMP 235ic is packed with the power to weld up to a half inch on mild steel, measuring in at 235 A at 40% duty cycle with a max output of 250 A/30 V.



Your options are now open with the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.8mm in both short arc and spray arc transfer, up to 1.2mm solid and cored wires. Plus, Rebel EMP 235ic can also weld stick rods up to 4.0mm and TIG rods up to 3.2mm




It takes more than a machine to get up and welding. So when you buy a Rebel EMP 235ic, you can expect all the equipment you need to get going – right out of the box – and from some of the best names in the industry.

  • Supplied With: Power source with 3 m mains cable and plug, MXL™270 3 m torch, welding and return cable kit 3m, gas hose with quick connector 4,5 m, drive rolls and contact tips.
Note: All contents listed are for Rebel EMP 235ic. 2 Wheel Trolley, TXH 202 TIG Torch and TIG Foot Pedal can be purchased seperately.


Arc Gun Consumables

Max Plate Thickness

Use With Welding Material 12.7 mm (1/2 in.)


Height 495 mm
Length 686 mm
Width 292 mm

Input Voltage

Frequency 50/60 Hz
Phase 1
Voltage 120, 208/230 V
Voltage 120 V
Voltage 230 V

Power Specifications

Current Range(A) 5 - 150 A
Voltage Tolerance 120 V
Current Range(A) 5 - 250 A
Voltage Tolerance 230 V
Max Output (A) 250 A
Max Output (V) 30 V
Open Circuit Voltage 90 VDC
Protection Class IP23S
Supply Plug 230 V, Schuko 16A plug
Voltage Range (V) 10 - 30 V


MCableX 3 m 3x2,5 mm2 H07RN-F
Standards CE: IEC/EN 60974-1, 5, 7, 10, 12 & 13. RoHS


Weight 28.6 kg

Welding Output

Duty Cycle 25 %
Input Voltage 230V
Output Current 230 A
Output Voltage 25.5 V
Welding Process MIG (GMAW/FCAW)
Duty Cycle 40 %
Input Voltage 230V
Output Current 195 A
Output Voltage 23.8 V
Welding Process MIG (GMAW/FCAW)
Duty Cycle 60 %
Input Voltage 230V
Output Current 170 A
Output Voltage 22.5 V
Welding Process MIG (GMAW/FCAW)
Duty Cycle 25 %
Input Voltage 230V
Output Current 210 A
Output Voltage 28.4 V
Welding Process MMA (SMAW)
Duty Cycle 60 %
Input Voltage 230V
Output Current 150 A
Output Voltage 26 V
Welding Process MMA (SMAW)

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Call Us Today
Fast Delivery
Collect In Store
© Weldsafe Limited 2017